TELPRO TUBULAR ANODES
|
TELPRO Tubular Anodes are manufactured using titanium, which meets ASTM B338 Grade 1 or
Grade 2 standards, which has been coated with TELPRO Mixed Metal Oxide coating. TELPRO MMO coating consists of IrO2/Ta2O5 and is suitable for use in all cathodic
protection applications.
Because mixed metal oxide anodes have an extremely low consumption rate, the titanium substrate remains constant throughout the design life of the anode. Based upon accelerated life testing, conducted by an independent laboratory, TELPRO MMO coating has been proven to be equivalent or superior to other mixed metal oxide coatings which are currently being used; a copy of this test report is available upon request. TELPRO ADVANTAGES
- Resin Filled & Helium Tested for an Effective Seal of the Connection - Cable End of Anode Protected with Teflon Sleeve - Center Connection is Tested for Resistance & is Less than .001 ohms - Variety of Cable Types and Sizes Available Anode current Output and design life can be varied according to customers requirements |
Close up of the Telpro centre connection.
Typical Horizontal Groundbed Layout.
Typical Deepwell Groundbed Layout.
| ||
TYPICAL TUBULAR ANODE RATINGS
